Lockwood 7 Skeleton Key

Description

Lockwood 7 Skeleton Key

Skeleton key for doors made by Lockwood. Marked on one side Lockwood MFC Co along the shaft and the number 7 on the bit. On the reverse, the shaft is marked Pat Nov. 2, 1880. The key measures 2 3/4″l with a 3/4″ long pin (insert). The bit has notches on each side near the top and one notch on the middle along the bottom. The bit is 15.7mm long from the top of the pin.

This item is shippable.

This Lockwood 7 Skeleton Key is an antique or salvaged item and may show wear due to age. This may include scratches, pitting, patina, finish loss, rust or other general wear. We attempt to include any significant damage beyond regular wear within the description. We make every effort to clean as much paint, dirt and rust off of items while still leaving as much of the original patina as possible. Photos are of actual item you will receive.

For more keys, follow the link here: https://saveinflorence.com/product-category/antique-hardware/keys/

Lockwood

Lockwood Hardware Manufacturing Company began in 1878 under Henry Sanford Lockwood and Henry W. Lester. In 1889, Lockwood purchased the Nashua Lock Company. After suffering a bit of decline due to the Great Depression, the Independent Lock Company (ILCO) absorbed Lockwood. In 1934, an Australia branch began which continues to this day. The company was later reincorporated under the original name. It continues today as Lockwood under the Assa Abloy Group.