Lockwood Skeleton Key 6

Description

Lockwood Skeleton Key 6

Skeleton key for doors made by Lockwood. Marked on one side Lockwood MFC Co along the shaft and the number 6 at the top. The key has a flat shaft.  The key measures 2 3/4″l with a 3/4″ long pin (insert). The bit has a very small notch in the middle bottom and both corners on the bottom are notched out. The bit is 15.9mm long from the top of the pin.

Light rusting over most surfaces, but this should not affect functionality.

This item is shippable.

This Lockwood Skeleton Key 6 is an antique or salvaged item and may show wear due to age. This may include scratches, pitting, patina, finish loss, rust or other general wear. We attempt to include any significant damage beyond regular wear within the description. We make every effort to clean as much paint, dirt and rust off of items while still leaving as much of the original patina as possible. Photos are of actual item you will receive.

For more keys, follow the link here: https://saveinflorence.com/product-category/antique-hardware/keys/

Lockwood

Lockwood Hardware Manufacturing Company began in 1878 under Henry Sanford Lockwood and Henry W. Lester. In 1889, Lockwood purchased the Nashua Lock Company. After suffering a bit of decline due to the Great Depression, the Independent Lock Company (ILCO) absorbed Lockwood. In 1934, an Australia branch began which continues to this day. The company was later reincorporated under the original name. It continues today as Lockwood under the Assa Abloy Group.